Research claims that there are nearly 100 people die every year due to elocution and improper handling of different power tools and cables etc. It is important to take security measures when dealing with electricity. Safety must not be treated with less consideration and some ground rules need to be implemented with adherence. Although we have to avoid dealing with such circumstances because it requires specific qualification and training. So in the electrical emergency situations, it’s better to contact professional emergency electrician instead of handling this dangerous situation by yourself. But if it becomes very crucial to put your hand in this work then below are the basic guidelines regarding the safe handling of electricity while working with it. We have jotted down some of the best and major electrical safety measures everyone should consider when working with electrical tools, chargers, cables and any other device that uses electricity. So folks, read more and we are about to tell you that this article can end up saving your life.
1. Never touch or try to fix on your own any electrical equipment or circuits with a damp or wet hand. By doing this, it increased the electric current conductivity. It is always better to avoid water when working with electricity.
2. Do not use equipment with cracked cords, damaged insulation or a broken plug.
3. Always turn off the mains when working on any receptacle at your home. It is better to put up signage on the service panel so that nobody accidentally turns the switch on.
4. Exposed energized parts and electrical parts may energize unexpectedly. This equipment should always bear warning signs like “shock risk”. Always observe these signs and follow preventive measures established by the electrical code provided by your country you are in.
5. Never attempt to fix energized equipment. Always check using a tester first and to make sure it is de-energized. When the bulb inside the tester lights up when the electric tester touches a live wire, then the electrical current is flowing through the respective wire. Always check with a tester to check all the wires, the outer metallic covering of the service panel and other lose wires with an electrical tester before working with electricity.
6. At all times, always use the correct insulated rubber gloves and goggles while working on any electrical circuit.
7. Do a monthly check up on all your GFCIs. A GFCI is called the Ground Fault Circuit Interrupter or an RCD (Residual Current Device which is very common in modern homes especially in areas like the bathroom and kitchen. This device helps avoid electrical shock hazards and designed to disconnect quickly enough to prevent any injury caused by over or short circuit shocks.
8. Never use a steel ladder or aluminium if you are working on any electric at height in your home. An electrical surge will ground you and the entire electric current will pass through your body. Instead, use a bamboo, any wooden stair, or a fibreglass ladder.
9. Before you do anything, always turn off the main first. Never make the mistake of leaving your mains on. Some terrible incidents were already reported just because people forgot to shut down the main.
10. Do not use broken equipment. As mentioned earlier, find broken charger cables and when it's not necessary to fix it then just get a new one. The wiser thing to do is never to work on with frayed or exposed cords, broken plugs, and damaged insulations.
FINAL WORDS
Homeowners need to realize that safety must never be compromised in any case working on with electricity and it would be great if the workplaces that concerns electricity. Now, if you are a homeowner who wants to be educated with electricity, then this is the article. People need to realize that to be educated about the safety precautions and ground rules are supposed to be taken seriously when working with electricity.
2. Do not use equipment with cracked cords, damaged insulation or a broken plug.
3. Always turn off the mains when working on any receptacle at your home. It is better to put up signage on the service panel so that nobody accidentally turns the switch on.
4. Exposed energized parts and electrical parts may energize unexpectedly. This equipment should always bear warning signs like “shock risk”. Always observe these signs and follow preventive measures established by the electrical code provided by your country you are in.
5. Never attempt to fix energized equipment. Always check using a tester first and to make sure it is de-energized. When the bulb inside the tester lights up when the electric tester touches a live wire, then the electrical current is flowing through the respective wire. Always check with a tester to check all the wires, the outer metallic covering of the service panel and other lose wires with an electrical tester before working with electricity.
6. At all times, always use the correct insulated rubber gloves and goggles while working on any electrical circuit.
7. Do a monthly check up on all your GFCIs. A GFCI is called the Ground Fault Circuit Interrupter or an RCD (Residual Current Device which is very common in modern homes especially in areas like the bathroom and kitchen. This device helps avoid electrical shock hazards and designed to disconnect quickly enough to prevent any injury caused by over or short circuit shocks.
8. Never use a steel ladder or aluminium if you are working on any electric at height in your home. An electrical surge will ground you and the entire electric current will pass through your body. Instead, use a bamboo, any wooden stair, or a fibreglass ladder.
9. Before you do anything, always turn off the main first. Never make the mistake of leaving your mains on. Some terrible incidents were already reported just because people forgot to shut down the main.
10. Do not use broken equipment. As mentioned earlier, find broken charger cables and when it's not necessary to fix it then just get a new one. The wiser thing to do is never to work on with frayed or exposed cords, broken plugs, and damaged insulations.
FINAL WORDS
 |
| Mcintosh Electrical |
No comments:
Post a Comment