There are a handful of repairs and fixes that a homeowner or a budding DIYer can do for their home. When it comes to small tasks that you can do yourself, there is nothing simpler than installing a ceiling fan. Yes, you can install your ceiling fan without the call for your emergency electrician Sydney. Investing in a ceiling fan may help you ventilate your living area or bedroom, adding savings on energy bills because it uses a small amount of electricity.
Installing small appliances in your home is an easy job, and it can be done using common hand tools you have at home. If you are new to this task, we have talked to a local electrician Sydney for some tips.
Here are tips on how to install a ceiling fan from the expert.
1. Locate Where You Want The Ceiling Fan Mounted. Ceiling fans should be ideally located in the center of the room. You can swap whatever light fixture you might have there. This will allow the fan to supply more air in the room.
2. Check if you have a Pre-Existing Circuit to your Selected Spot or If You Need a new one. The most common cause of the electrical fire is an overloaded circuit, so you have to take precautions. Ceiling fans do not employ as much electricity as the lighting fixture. If you are going to install the ceiling fan on the spot vacated by a lighting fixture, then you can proceed. But if this is a new location, you need to run a new line from the breaker for your ceiling fan. In this case, you have to call an electrician Sydney.
3. Ensure that there is Blade Clearance. The Ceiling should have at least 7 to 10 inches clearance below the highest point of the roof. It should be 8-10 inches below the ceiling to have good airflow. If you don’t have this clearance, you need to install a shallow mount for your ceiling fan.
4. Read the Instruction Manual. This is the most crucial point, always read the instruction manual as it is loaded with information and troubleshooting guide.
5. Shut down the Power before Installation. You don’t have to shut down all the electricity inside your home, only the electric power within the circuit where you will place your ceiling fan. Make sure that the junction box is strong enough to carry the additional weight and can support the vibration during the installation.
6. Make sure that you have one everything right before turning on the Electric Power. If you notice smoke when you turn it on, call an emergency electrician Sydney. If all goes well, then start showing it off to your family and friends.
Doing simple tasks in your home can be an achievement. But if you are not sure that you can install the ceiling fan properly, admit it and call for an electrician to help. It is better safe than sorry. In Sydney, you can call McIntosh Electrical. They can do appliances installations at an affordable rate.
No comments:
Post a Comment